2018-至今 同济大学，结构防灾减灾工程系，副教授
2014-2018同济大学，结构防灾减灾工程系，助理研究员
2013-2014香港AECOM工程顾问有限公司，项目工程师
2009-2013香港大学，土木工程专业，博士
2006-2009同济大学建筑设计院同元分院，结构工程师
2003-2006同济大学，结构工程专业，硕士
1999-2003同济大学，土木工程专业，学士
钢筋混凝土结构抗火性能
钢筋混凝土结构加固技术
高性能混凝土材料开发与应用
既有结构灾后检测与损伤评估
植筋式后锚固连接高温下抗剪性能研究
梁侧锚固钢板法加固火灾后混凝土梁受力性能研究
侧面锚固钢板法加固混凝土框架节点抗震性能研究
地震 - 火灾耦合作用下自复位混凝土框架节点损伤演变机理研究
超高强超高延性混凝土材料性能研究
火灾后混凝土梁柱节点的锚钢加固机理研究（国家自然科学基金面上项目），主持，2018-2021
高温（火灾）下植筋式后锚固连接的抗剪机理研究（国家自然科学基金青年项目），主持，2015-2017
耐高温结构胶热损伤与控制机制研究（中央高校基本科研业务费专项-学科交叉类），主持，2017-2019
西方建筑结构技术在近代上海的本土化及其持续影响研究（中央高校基本科研业务费专项-学科交叉类），主持，2015-2017
钢板受压屈曲特性对梁侧锚固钢板加固混凝土梁的性能影响机理研究（中央高校基本科研业务费专项），主持，2015-2016
地震火灾耦合作用下自复位混凝土框架节点损伤演变机理研究 （国家自然科学基金面上项目），参与，2018-2021
火灾（高温）后混凝土结构抗剪机理及残余抗剪承载力分析（国家自然科学基金面上项目），参与，2014-2017
梁侧锚固钢板法（BSP）加固混凝土梁的试验与理论研究（香港政府研资局基金项目），参与，2013-2015
火灾后混凝土损伤机理及评估方法的研究（国家自然科学基金面上项目），参与，2007-2010
(A) 学术专著：
李凌志. 锚固钢板加固混凝土梁的试验、仿真及设计. 上海: 同济大学出版社, 2017年5月.
(B) 英文期刊：
LZ Li, ZW Cai, KQ Yu*, YX Zhang, Y Ding. Performance-based design of all-grade strain hardening cementitious composites with compressive strengths from 40 MPa to 120 MPa. Cement and Concrete Composites. 2019; 97(4): 202-17. (SCI)
LZ Li, X Liu, JT Yu*, ZD Lu, MN Su, JH Liao, M Xia. Experimental study on seismic performance of post-fire reinforced concrete frames. Engineering Structures. 2019; 179(1): 161-173. (SCI)
LZ Li, ZL Wu, JT Yu*, X Wang, JX Zhang, ZD Lu. Numerical simulation of the shear capacity of bolted side-plated RC beams. Engineering Structures. 2018; 171(9): 373-84. (SCI)
KQ Yu, LZ Li, JT Yu*, JZ Xiao, JH Ye, YC Wang. Feasibility of using ultra-high ductility cementitious composites for concrete structures without steel rebar.Engineering Structures. 2018;170(9): 11-20. (SCI)
LZ Li*, ZW Cai, ZD Lu, XL Zhang. Shear performance of bolted side-plated reinforced concrete beams. Engineering Structures. 2017; 144(8): 73-87. (SCI)
L Wang, RKL Su*, B Cheng, LZ Li, L Wan, ZW Shan. Seismic behavior of preloaded rectangular RC columns strengthened with precambered steel plates under high axial load ratios. Engineering Structures. 2017; 152(12): 683-697. (SCI)
LZ Li, CJ Jiang, LJ Jia, ZD Lu*. Local buckling of bolted steel plates with different stiffener configuration.Engineering Structures. 2016; 119(7): 186-197. (SCI)
RKL Su*, LZ Li, SH Lo. Shear transfer in bolted side-plated reinforced concrete beams. Engineering Structures. 2013; 56(11): 1372-1383. (SCI)
JT Yu, KK Liu, LZ Li*, YC Wang, KQ Yu, QF Xu. A simplified method to predict the fire resistance of RC Beams strengthened with near-surface mounted CFRP. Composite Structures. 2018;193(6): 1-7. (SCI)
KQ Yu, LZ Li, JT Yu*, YC Wang, JH Ye, QF Xu. Direct tensile properties of engineered cementitious composites: a review. Construction and Building Materials, 2018; 165: 346-362. (SCI)
SH Lo, LZ Li*, RKL Su. Optimization of partial interaction in bolted side-plated reinforced concrete beams. Computers & Structures. 2014; 131(1): 70-80. (SCI)
CJ Jiang, ZD Lu, LZ Li*. Shear performance of fire-damaged reinforced concrete beams repaired by a bolted side-plating technique. Journal of Structural Engineering (ASCE). 2017; 143(5): 04017007. (SCI)
CJ Jiang, JT Yu, LZ Li*, X Wang, L Wang, JH Liao, Experimental study on the residual shear capacity of fire-damaged reinforced concrete frame beams and cantilevers, Fire Safety Journal. 2018; 100(9): 140-156. (SCI)
LZ Li*, CJ Jiang, RKL Su, SH Lo. Design of bolted side-plated RC beams with partial interaction. ICE - Structures and Buildings. 2016; 169(2): 81-95. (SCI, 获香港工程师学会 Finalist - R&D Award of Structural Excellence Award 2017, HKIE)
Liu X, Lu ZD, LZ Li*. The use of bolted side plates for shear strengthening of RC beams: A review. Sustainability. 2018; 10(12): 4658. (SCI)
JT Yu, YC Wang, KL Zhan, LZ Li*, KQ Yu. Using XFEM to model the effect of different axial compression on the hysteretic behaviour of the flexure-dominant RC columns. The Structural Design of Tall and Special Buildings. 2018: e1465 (SCI)
LZ Li, CJ Jiang*, RKL Su, SH Lo. A piecewise linear transverse shear transfer model for bolted side-plated beams. Structural Engineering Mechanics. 2017; 62(4): 443-453. (SCI)
XL Xu, ZD Lu, LZ Li*, CJ Jiang. Numerical study on the local buckling behaviour of bolted steel plates in steel jacketing. Advances in Materials Science and Engineering. 2017; 1352084. (SCI)
LF Zhang, WQ Liu, GQ Sun, L Wang*, LZ Li. Two-dimensional modeling of thermo-mechanical responses of rectangular GFRP profiles exposed to fire. Advances in Materials Science and Engineering. 2017; 1705915. (SCI)
KL Su, LZ Li*, SH Lo. Longitudinal partial interaction in bolted side-plated reinforced concrete beams. Advances in Structural Engineering. 2014; 17(7): 921-936. (SCI)
LZ Li, SH Lo, RKL Su*. Experimental study of moderately reinforced concrete beams strengthened with bolted-side steel plates. Advances in Structural Engineering. 2013; 16(3): 499-516. (SCI)
WY Lam, LZ Li, RKL Su*, HJ Pam. Behaviour of plate anchorage in plate-reinforced composite coupling beams. The Scientific World Journal. 2013; 190430. (SCI)
(C)中文期刊：
姜常玖, 陆洲导, 李凌志*, 刘波洲. 梁侧锚固钢板加固高温后混凝土梁受剪性能试验研究. 建筑结构学报. 2017; 38(3): 67-75. (EI)
姜常玖, 陆洲导, 李凌志*, 苏磊. 混凝梁侧锚固钢板加固火后混凝土梁受弯试验研究. 同济大学学报（自然科学版）. 2017; 45(12): 1755-1764. (EI)
陆洲导, 徐晓亮, 杭启兵, 李凌志*, 苏磊. 混凝土梁侧锚固钢板受压屈曲特性的数值模拟. 同济大学学报（自然科学版）. 2017; 45(1): 1-8. (EI)
刘鑫, 陆洲导, 蔡自伟, 李凌志*. 梁侧锚钢加固钢筋混凝土梁火灾后受剪性能研究. 浙江大学学报（工学版）. 2018; 52(5): 853-863. (EI)
蔡自伟, 陆洲导, 李凌志*, 苏磊. 梁侧锚固钢板加固混凝土梁抗剪性能试验. 浙江大学学报（工学版）. 2018; 52(1): 1-7. (EI)
蔡自伟, 陆洲导, 李凌志*. 基于ATENA的梁侧锚固钢板加固梁中纵横向滑移数值模拟. 中南大学学报（自然科学版）. 2017; 48(12): 3316-3327. (EI)
李凌志*, 姜常玖, 陆洲导, 苏启亮. 梁侧锚固钢板加固混凝土梁的横向剪力传递模型. 湖南大学学报（自然科学版）. 2016; 43(3): 113-119. (EI)
李凌志, 张晓亮, 姜常玖, 陆洲导*. 梁侧锚固钢板法中钢板受压屈曲特性试验研究. 华中科技大学学报（自然科学版）. 2016; 44(10): 41-46. (EI)
(D)会议论文或报告：
LZ Li*, Y Bai, L Su, JT Yu, ZD Lu. Experimental study on reinforced concrete beams after fire repaired by bolted side-plating. 10th International conference on short and medium span bridges. 2018; Quebec City, Canada. (Rehabilitaion and Seismic Retrofit 分会场主席)
LZ Li, X Liu, ZD Lu, K Wei. Seismic performance of reinforced concrete frames after fire. 10th International conference on structures in fire. 2018; 909-916, Belfast, UK. (大会报告)
YQ Jia, ZD Lu, LZ Li*, ZL Wu. A review of applications and research of shape memory alloys in civil engineering. 2018 International Seminar on Construction Science and Civil Engineering (ISCSCE 2018). 2018; Zhuhai, China. (收录于: IOP Conference Series: Materials Science and Engineering. (EI)).
LZ Li*, CJ Jiang, BZ Liu, ZD Lu. Shear strengthening of fire-damaged reinforced concrete beams using bolted-side plating. Protect 2017 - sixth international workshop on performance, protection & strengthening of structures under extreme loading. 2017; Guangzhou, China. (收录于: Procedia Engineering. 2017; 210: 186-195. (EI)).
X Liu, LZ Li*, ZD Lu, ZW Cai. Fire resistance of RC beams strengthened with bolted side-plates. The 2017 World Congress on Advances in Structural Engineering and Mechanics, 2017; Seoul, Korea.
LZ Li*, XL Zhang, SY Zhao. Shear and flexural design of reinforced concrete beams strengthened with bolted side-plates. The 2017 World Congress on Advances in Structural Engineering and Mechanics, 2017; Seoul, Korea.
RKL Su, LZ Li*. Strengthening of concrete structures by bolting of steel plates. Hong Kong Concrete Institute Annual Seminar. 2013; Hong Kong, China. (特邀大会报告)
LZ Li*, RKL Su, SH Lo. Simplified flexural design of bolted-side-plated beams with partial interaction. The Joint 6th International Conference on Advances in Experimental Structural Engineering (6AESE), 2015; Urbana Illinois, US
LZ Li*, RKL Su, SH Lo. Study of moderately reinforced concrete beams strengthened by bolted-side steel plates. Design Fabrication and Economy of Metal Structures. 2013; Miskolc, Hungary
蔡自伟, 李凌志, 姜常玖, 刘鑫, 陆洲导*. 梁侧锚固钢板加固高温后混凝土梁的试验研究. 第八届全国抗震加固改造技术学术交流会, 2017; 济南.(收录于: 工程抗震与加固改造, 2017, 39(z):1-6).
商兴艳, 陆洲导, 李凌志*, 余江滔. 纤维种类对S-ECC加固火灾后混凝土梁抗剪性能的影响. 第九届全国结构抗火技术研讨会, 2017; 兰州.
魏锴, 陆洲导, 李凌志*, 廖杰洪. 火灾后钢筋混凝土梁抗剪性能的数值模拟. 第九届全国结构抗火技术研讨会, 2017; 兰州.
罗干, 陆洲导, 李凌志*. 高温后混凝土梁的抗剪性能研究, 第十三届全国建筑物鉴定与加固改造学术会议, 2016; 172-176. 成都.（优秀会议论文）
陆洲导, 覃亨, 邱振宁, 商兴艳, 李凌志*. ECC与高温后混凝土粘结面抗剪性能研究, 第十三届全国建筑物鉴定与加固改造学术会议, 2016; 149-153. 成都.
刘波洲, 陆洲导, 李凌志*. 梁侧锚固钢板加固高温后混凝土梁抗剪性能试验研究. 第八届全国结构抗火技术研讨会, 2015; 厦门
李凌志*, 苏启亮, 罗世轩, 陆洲导. 梁侧锚固钢板法加固中等配筋混凝土梁. 全国建筑物检测鉴定与加固改造第十二届学术交流会, 2014; 广州
至2019年1月为止，李凌志博士共发表学术论文60余篇，除以上代表作外还包括数篇中文核心论文和会议论文。
担任如下学术组织会员：
美国土木工程师学会（ASCE）
中国建筑协会抗震防灾分会抗火委员会
上海土木工程师学会
担任如下期刊审稿人：
Engineering Structures
ACI Structural Journal
Composites Part B: Engineering
Structural Engineering and Mechanics
Advances in Structural Engineering
Structure and Infrastructure Engineering
......